Factory Address: 5 Curban St, Underwood 4119 QLD
Factory Outlet: 30 Kingston Rd, Underwood 4119 QLD
CRYSTAL PAINTS AUTOMOTIVE PAINT
Turps Based

AUTOMOTIVE PAINT
This is a polyurethane based enamel that is very easy to use for basic automotive, motorcycle, and machinery jobs.
Can be brushed, rolled or sprayed
Re coat time is 2 – 4 hours depending on weather conditions
Thinning and clean up – use mineral turps only
Preparation
Can be painted onto most solid pre painted surfaces. Remove all oxidation, oils etc then key sand off and do a small test patch first on the prepared surface to compare compatibility.
Bare steel should be undercoated with crystal red or grey oxide zinc chromate primer.
Motorcycle plastic fairings can be sanded lightly and applied straight on.
Automotive plastics and fibreglass can be applied straight on after a fine sand.
Colours available white, blue, black, yellow, golden yellow, red and many lighter colours.
Do not mix with any other paints, solvents or additives as this could affect the performance of the paint.
Coverage is 10-12 square metres per litre.
What else do I need to know?
1. If you’re going to spray, you will need to thin the paint out about 5-10% mineral turps or more depending on your spray unit.
2. Do not paint if the temperature is less than 12 degrees c.
3. We recommend you use gloves, protective clothing, eye protection, breathing apparatus, protective footwear, and have adequate ventilation.
​
​
​
To order paint please call 07 3341 3566.
​
​
​
All of Crystal Paints, paint is made in Australia and is 100% Australian owned.
CUSTOMER PHOTOS
​
CLICK ON ANY IMAGE TO ENLARGE
![]() | ![]() | ![]() |
---|---|---|
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |